Friday, January 17, 2014

Completed: The Wardrobe Basic. Including tutorial for FBA on shoulder dart

The first garment of my spring SWAP is done; the "Wardrobe Basic" from Ottobre. Can I just say, what a quick, cute and usable pattern!! Or actually, not quick at all if you count more than 1,5 h of hand sewing to get invisible hems and facings. If you like topstitching it will indeed be very quick, but I love neat finishings and pretty insides of garments.

I think the pattern of the fabric turned out fun!

Inside trimmings. The bias tape has GOLD stripes!!!

Matching pattern on the sleeve too.

And the back. Nice fit, don't you think?

I LOVE pretty insides!

I love how it turned out. I did make some alterations, without making any muslin, but I just had a feeling it was going to turn out the way I wanted anyway. Luckily it did - phew! I am pretty certain I'm gonna use this pattern again. Imagine this as a summer jacket made from dark denim!! Want!

The fabric was a vintage scrap designed by Maud Fredin Fredholm. The pattern was quite intricate so it took me a while to decide how to put the pattern pieces so it wouldn't turn out too crazy. The leftovers will be enough for a couple beanies, an infinity scarf or some other accessory.

Sorry for not showing any live pictures, but I have a pajama-day with sick kids at home. Didn't feel like posing...


So, what alterations did I make?

#1 - FBA (Full bust adjustment)

I ALWAYS do an FBA these days. There is really no reason not to since it makes a world of difference to the fit. Don't be a lazy fart when it comes to FBA - it is always worth the effort, trust me!

This pattern already has a dart in the shoulder on the front, and I believe alterations like FBA should not have to change the design of the pattern. So, therefore, after having done the FBA you move the dart into the dart you already have on the shoulder. I thought I'd show you how it's done, but since I forgot to take pictures during the process and I don't have time to redo it, I'll give you a quick and dirty drawing tutorial instead :-)


Mark the regular FBA lines (blue) and slash the pattern. For more details on the basics go here. Spread the pattern your desired amount. Then it will look like this:


Tape in paper everywhere except in the new bust dart, which remains open. That is, within the blue dotted area:


Now, we don't want a bust dart because that alters the design of the garment, remember, so we need to move it! To do this we slash from the shoulder dart down to the point of the bust dart - but not all the way through! See red line:


Then we close the bust dart by pivoting the paper like shown by the arrow. Tape the dart closed and notice the shoulder dart wide opened. Continue drawing the shoulder dart legs until they meet (and make sure they are equal length) and there you have your new dart.


Tape in paper to fill the gap - voila! The green shape is the new pattern.



#2 - Reshaping the front panel

Since I knew I don't want to wear this cardigan closed I prefer the shape at the front to be more rounded. I simply shaved off a slice from the front pattern and did the same to the facing.


Hope this was helpful!

/Alexandra

3 comments:

C'mon and make my day!